Skip to the page

MOCKUP — placeholder contact details, sample listings, and modeled cost ranges. Every listing on this build is a PLACEHOLDER, not a real business. Replace before launch.

Storm claim open? A contractor who offers to “take care of” your deductible is describing insurance fraud in many states. Read this before you sign

Licence-checked roofers · the code items and the claim mechanics on every city pageFree to homeowners

Roofing works

Metal Roofing: cost, spec, and what to ask

Standing seam and exposed-fastener panels. Two or three times the price of shingles, several times the lifespan, and entirely dependent on the detailing at penetrations and edges.

Get quotesFind a local contractor

  • National range $900–$3,200/square, or roughly $21,600–$76,800 for a 24-square roof (about 2,400 sq ft of roof area)
  • Modeled, not quoted

Before you sign

What a metal roof bid should spell out

  1. The assembly, by name

    Covering and line, underlayment type, ice barrier where required, starter and ridge components, valley treatment, drip edge and pipe boots. Substituted cut shingles for starter and ridge is the commonest quiet saving.

  2. The fastening pattern

    The manufacturer publishes one per wind zone, and it is what actually determines wind performance. Ask which pattern, and ask whether it matches the local design wind speed.

  3. What drives the price

    Panel profile and gauge, standing seam versus exposed fastener, substrate and whether a solid deck is required, and the detailing at penetrations, valleys and edges — which is where the price and the lifespan both live.

  4. Decking, permit and inspection

    The per-sheet unit rate for decking replacement, who pulls the permit, and whether the deck is inspected after tear-off. The full checklist.

Cost

What metal roof costs nationally

Regional figures are on each city page. These are the unadjusted national ranges.

Modeled cost by roof type
Roofing workUnit pricea 24-square roof (about 2,400 sq ft of roof area)What moves the price
Metal Roofing$900–$3,200/square$21,600–$76,800Panel profile and gauge, standing seam versus exposed fastener, substrate and whether a solid deck is required, and the detailing at penetrations, valleys and edges — which is where the price and the lifespan both live.

How these are calculated. Ranges are modeled from national published installed-cost figures adjusted by a regional cost index for this area, per roofing square of 100 square feet. They are estimates for orientation only — not quotes, not offers, and not binding on any contractor. Pitch, the number of layers to remove, decking repairs found after tear-off, and code items such as an ice barrier move the total more than the shingle brand does. Confidence: modeled, reviewed 2026-09-10.

Priced separately

  • Decking replacement found after tear-off — $70–$160 per sheet — insist on a unit rate in the contract, not a number after the fact
  • Ice barrier at the eaves — $60–$140 per square where the code requires it, and it is not optional there
  • Second or third layer tear-off and disposal — $80–$180 per square per extra layer
  • Permit and inspection fees — set by the local building department, commonly $150–$900
  • Chimney or skylight flashing rebuild — $400–$2,500 each, and the most common source of a 'new roof still leaks' call
  • Product-approval-compliant assembly in a high-wind zone — adds 10–30% where the jurisdiction requires approved components

Metal Roofing questions

How much does metal roof cost?

Nationally modeled at $900–$3,200/square, or roughly $21,600–$76,800 for a 24-square roof (about 2,400 sq ft of roof area). Your area's figure is on your city page, adjusted by a regional index.

What drives the price of metal roof?

Panel profile and gauge, standing seam versus exposed fastener, substrate and whether a solid deck is required, and the detailing at penetrations, valleys and edges — which is where the price and the lifespan both live.

Will insurance pay for metal roof?

Sometimes, and only your policy and your carrier can answer it — we are a directory, not a public adjuster. In general terms, storm damage is a covered peril and wear is not, the first payment is usually actual cash value with the balance released after completion, and code items the old roof lacked are paid for only if you carry ordinance-and-law coverage. The plain-language version.

Facts on this page last checked .

Get up to 3 quotes