Skip to the page

MOCKUP — placeholder contact details, sample listings, and modeled cost ranges. Every listing on this build is a PLACEHOLDER, not a real business. Replace before launch.

Storm claim open? A contractor who offers to “take care of” your deductible is describing insurance fraud in many states. Read this before you sign

Licence-checked roofers · the code items and the claim mechanics on every city pageFree to homeowners

Cost guide

What a roof actually costs

National modeled ranges per roofing square — 100 square feet of roof area, not floor area — plus the line items that get quoted separately. A 2,000 sq ft house commonly has 22 to 28 squares of roof once pitch and overhangs are counted, which is why homeowners consistently underestimate.

  • Not a quote
  • Confidence: modeled
  • Reviewed 2026-09-10

Before you sign

Before you rely on a number from this page

These are not quotes. Confidence: modeled. If a contractor holds to a number they saw on this site, they are misreading it and so are we.

Bundles of shingles and formed metal edge flashing stacked on bare roof decking

Modeled ranges, national

Modeled cost by roof type
Roofing workUnit pricea 24-square roof (about 2,400 sq ft of roof area)What moves the price
Roof Repair & Leak Tracing$350–$2,800 each—Priced per repair, not per square. Whether the leak has been traced or guessed at, access and pitch, how much of the surrounding covering has to be lifted, and whether the decking underneath is still sound.
Full Roof Replacement$380–$1,250/square$9,120–$30,000Pitch and stories (both change labour and safety equipment), number of existing layers to tear off, decking repairs found once it is open, underlayment and ice barrier, valley and flashing work, and disposal.
Asphalt Shingle Roofs$350–$1,100/square$8,400–$26,400Shingle line — three-tab through designer laminate — underlayment type, nailing pattern (the single biggest determinant of wind performance), and starter and ridge components that are often substituted for cut shingles.
Metal Roofing$900–$3,200/square$21,600–$76,800Panel profile and gauge, standing seam versus exposed fastener, substrate and whether a solid deck is required, and the detailing at penetrations, valleys and edges — which is where the price and the lifespan both live.
Flat & Low-Slope Membrane$550–$1,800/square$13,200–$43,200Membrane type and thickness, insulation and tapered insulation to make drainage work, attachment method, flashing at parapets and penetrations, and whether the existing assembly has to come off.
Storm & Hail Damage Restoration$400–$1,400/square$9,600–$33,600The scope the carrier agrees to, which is the real variable: a repair, a slope, or the whole roof, plus code upgrades where the policy covers them. Pitch, layers and decking repairs apply the same as any replacement.
Attic Ventilation & Insulation$450–$4,500 each—Priced per job. Ridge and soffit vent length, whether intake is actually open (it is frequently blocked by insulation), attic insulation depth, and any bath or kitchen ducts discharging into the attic.
Gutters, Flashing & Valleys$9–$42/ft—Gutter size and material, downspout count and where they discharge, and the flashing work: step flashing at walls, counter-flashing, drip edge and valley metal. Seamless aluminium and copper are not the same product.

How these are calculated. Ranges are modeled from national published installed-cost figures adjusted by a regional cost index for this area, per roofing square of 100 square feet. They are estimates for orientation only — not quotes, not offers, and not binding on any contractor. Pitch, the number of layers to remove, decking repairs found after tear-off, and code items such as an ice barrier move the total more than the shingle brand does. Confidence: modeled, reviewed 2026-09-10.

Priced separately — get these in writing

Line items that arrive after the bid

  • Decking replacement found after tear-off — $70–$160 per sheet — insist on a unit rate in the contract, not a number after the fact
  • Ice barrier at the eaves — $60–$140 per square where the code requires it, and it is not optional there
  • Second or third layer tear-off and disposal — $80–$180 per square per extra layer
  • Permit and inspection fees — set by the local building department, commonly $150–$900
  • Chimney or skylight flashing rebuild — $400–$2,500 each, and the most common source of a 'new roof still leaks' call
  • Product-approval-compliant assembly in a high-wind zone — adds 10–30% where the jurisdiction requires approved components

Last reviewed 2026-09-10. Ranges are re-reviewed against published national figures on this schedule; the regional index is modeled, not measured.

Facts on this page last checked .

Get up to 3 quotes