Roofing works
Asphalt Shingle Roofs: cost, spec, and what to ask
The most common residential roof covering in the country. The shingle rating matters less than the underlayment, the nailing pattern and whether the valleys and flashings were done properly.
- National range $350–$1,100/square, or roughly $8,400–$26,400 for a 24-square roof (about 2,400 sq ft of roof area)
- Modeled, not quoted
Before you sign
What a shingle roof bid should spell out
The assembly, by name
Covering and line, underlayment type, ice barrier where required, starter and ridge components, valley treatment, drip edge and pipe boots. Substituted cut shingles for starter and ridge is the commonest quiet saving.
The fastening pattern
The manufacturer publishes one per wind zone, and it is what actually determines wind performance. Ask which pattern, and ask whether it matches the local design wind speed.
What drives the price
Shingle line — three-tab through designer laminate — underlayment type, nailing pattern (the single biggest determinant of wind performance), and starter and ridge components that are often substituted for cut shingles.
Decking, permit and inspection
The per-sheet unit rate for decking replacement, who pulls the permit, and whether the deck is inspected after tear-off. The full checklist.

Cost
What shingle roof costs nationally
Regional figures are on each city page. These are the unadjusted national ranges.
| Roofing work | Unit price | a 24-square roof (about 2,400 sq ft of roof area) | What moves the price |
|---|---|---|---|
| Asphalt Shingle Roofs | $350–$1,100/square | $8,400–$26,400 | Shingle line — three-tab through designer laminate — underlayment type, nailing pattern (the single biggest determinant of wind performance), and starter and ridge components that are often substituted for cut shingles. |
How these are calculated. Ranges are modeled from national published installed-cost figures adjusted by a regional cost index for this area, per roofing square of 100 square feet. They are estimates for orientation only — not quotes, not offers, and not binding on any contractor. Pitch, the number of layers to remove, decking repairs found after tear-off, and code items such as an ice barrier move the total more than the shingle brand does. Confidence: modeled, reviewed 2026-09-10.
Priced separately
- Decking replacement found after tear-off — $70–$160 per sheet — insist on a unit rate in the contract, not a number after the fact
- Ice barrier at the eaves — $60–$140 per square where the code requires it, and it is not optional there
- Second or third layer tear-off and disposal — $80–$180 per square per extra layer
- Permit and inspection fees — set by the local building department, commonly $150–$900
- Chimney or skylight flashing rebuild — $400–$2,500 each, and the most common source of a 'new roof still leaks' call
- Product-approval-compliant assembly in a high-wind zone — adds 10–30% where the jurisdiction requires approved components
Asphalt Shingle Roofs questions
How much does shingle roof cost?
Nationally modeled at $350–$1,100/square, or roughly $8,400–$26,400 for a 24-square roof (about 2,400 sq ft of roof area). Your area's figure is on your city page, adjusted by a regional index.
What drives the price of shingle roof?
Shingle line — three-tab through designer laminate — underlayment type, nailing pattern (the single biggest determinant of wind performance), and starter and ridge components that are often substituted for cut shingles.
Will insurance pay for shingle roof?
Sometimes, and only your policy and your carrier can answer it — we are a directory, not a public adjuster. In general terms, storm damage is a covered peril and wear is not, the first payment is usually actual cash value with the balance released after completion, and code items the old roof lacked are paid for only if you carry ordinance-and-law coverage. The plain-language version.
Facts on this page last checked .